TITLE

Adhesives & SealantsSCANECO Low-Viscosity Wet Injection Agent

Industrial & Chemical Products Fine Chemicals

  • Model Name

    SC-706

  • Specification

    27KG

  • Color

    Transparency

  • Introduction

    [SC-706] Low-Viscosity Wet Injection Agent

  • Certification
  • Price

    -

Low-Viscosity Wet Injection Agent SC-706


Introduction

As a wet concrete crack grout injection agent, this product has excellent water resistance, 

so the adhesion on the wet surface or physical properties are almost equivalent to those of 

a product at room temperature.


Intended Use

- Underwater structure crack grout injection

- Pier submerged area crack grout injection

- Tunnel, irrigation canal, submerged weir, dam crack grout injection

- Underground structure crack grout injection


Features

- Thanks to low viscosity, injection operation is very fast

- It is an epoxy-based type with excellent chemical resistance and durability

- Excellent adhesive strength, water resistance, and durability

- It provides excellent penetrability in the concrete; thus increasing the surface strength on the crack site

- It is solvent-free, so there is neither shrinkage nor crack


 

Storage

- Store in a dry place at room temperature of 20 with the lid completely closed.

- Products whose shelf life has expired shall be discarded chemically.

- Shelf life: 4 months in summer, 6 months in winter

 


Instructions for handling

- Dont eat or smoke in the workshop.

- Be careful not to let the product come in contact with skin- In case of contact with skin, wash thoroughly with neutral detergent.

- If you ingest the product, induce vomiting immediately and seek medical attention.

- Let the chief stationed permanently supervise and direct the work so that there are no safety accidents.

- Persons other than workers are not allowed to access the workshop.

- Stop the work in case of rain or when the temperature is below 5.

- In case of rain, if the product is exposed to rain, water flows into the lid even if the lid is closed, so store indoors or 

  cover with plastic bag when storing outdoors to prevent water from entering.   

- The construction site is marked with a safety sign, and access is prohibited during curing.

- Do not weld or use fire around the workshop.

- Cover the remaining product after use with a lid to prevent oxidation.

- Note that the pot life is short in summer and long in winter.