TITLE

Adhesives & SealantsSCANECO New/Old Concrete Adhesive

Industrial & Chemical Products Fine Chemicals

  • Model Name

    SC705

  • Specification

    27KG

  • Color

    Transparency

  • Introduction

    [SC-705] New/Old Concrete Adhesive

  • Certification
  • Price

    -

New/Old Concrete Adhesive SC-705 


Introduction

This product is used when placing concrete in contact with hardened concrete or overlaying 

new concrete on old concrete. If shrinkage and expansion are different when adhering new 

and old concrete, poor adhesion occurs. SC-705 has almost the same expansion coefficient 

and tensile strength as those of concrete, so this product reduces the separation considerably. 


Intended Use

- Placing concrete in contact with hardened concrete and overlaying new concrete

- Reinforcing the separated site of aggregate

- Floor surface iron adhesive

- Reinforcing the sunken area of concrete


Features

- Excellent adhesive strength even in wet condition

- Excellent water resistance, chemical resistance, and workability

- Available down to three degrees below zero in winter 

- No separation because the shrinkage and expansion are almost the same as those of concrete

 

Storage

- Store in a dry place at room temperature of 20 with the lid completely closed.

- Products whose shelf life has expired shall be discarded chemically.

- Shelf life: 4 months in summer, 6 months in winter

 

Instructions for handling

- Dont eat or smoke in the workshop.

- Be careful not to let the product come in contact with skin- In case of contact with skin, wash thoroughly with neutral detergent.

- If you ingest the product, induce vomiting immediately and seek medical attention.

- Let the chief stationed permanently supervise and direct the work so that there are no safety accidents.

- Persons other than workers are not allowed to access the workshop.

- Stop the work in case of rain or when the temperature is below 5.

- In case of rain, if the product is exposed to rain, water flows into the lid even if the lid is closed, so store indoors or 

  cover with plastic bag when storing outdoors to prevent water from entering.   

- The construction site is marked with a safety sign, and access is prohibited during curing.

- Do not weld or use fire around the workshop.

- Cover the remaining product after use with a lid to prevent oxidation.

- Note that the pot life is short in summer and long in winter.