High-Viscosity Dry Putty SC-508

Introduction

This product is a product used for various kinds of puttying. Because solvents are not mixed in, 

it is a product free of cracking or deteriorated adhesive strength. 

Intended Use

- Edge adhesion in reinforcing steel plate and resin plate

- Puttying onto a place of wide crack

- Repairing on the separated site of aggregate

Features

- Has good weather resistance since the shrinkage and expansion are the same as those of concrete, which results in no separation

- Excellent water resistance, saltwater resistance, chemical resistance

- Low absorption rate and excellent adhesive property

- No shrinkage results in no crack after puttying 

Storage

- Store in a dry place at room temperature of 20℃ with the lid completely closed.

- Products whose shelf life has expired shall be discarded chemically.

- Shelf life: 4 months in summer, 6 months in winter

Instructions for handling

- Don’t eat or smoke in the workshop.

- Be careful not to let the product come in contact with skin- In case of contact with skin, wash thoroughly with neutral detergent.

- If you ingest the product, induce vomiting immediately and seek medical attention.

- Let the chief stationed permanently supervise and direct the work so that there are no safety accidents.

- Persons other than workers are not allowed to access the workshop.

- Stop the work in case of rain or when the temperature is below 5℃.

- In case of rain, if the product is exposed to rain, water flows into the lid even if the lid is closed, so store indoors or 

  cover with plastic bag when storing outdoors to prevent water from entering.   

- The construction site is marked with a safety sign, and access is prohibited during curing.

- Do not weld or use fire around the workshop.

- Cover the remaining product after use with a lid to prevent oxidation.

- Note that the pot life is short in summer and long in winter.