TITLE

Adhesives & SealantsSCANECO High-Viscosity Wet Putty

Industrial & Chemical Products Fine Chemicals

  • Model Name

    SC-509

  • Specification

    15KG

  • Color

    Gray

  • Introduction

    [SC-509] High-Viscosity Wet Putty

  • Certification
  • Price

    -

High-Viscosity Wet Putty SC-509


Introduction

This product is a putty adhesive used for crack injection grouting on the wet surface.


Intended Use

- Puttying the damaged site of wharf deck pile under the water and repairing & reinforcing the damaged site of seabed facility

- Putty for concrete joint under the water

- Underwater and wet surface concrete structure crack injection putty

- Filler for sunken area at the bottom of the marine products center

- Repairing & reinforcing the damaged site in swimming pool, rainwater tank, water tank, and water sources


Features

- It has good weather resistance since the shrinkage and expansion are the same as those of concrete, which results in no separation

- Excellent water resistance, saltwater resistance, chemical resistance

- Low absorption rate and excellent adhesive property

- No shrinkage results in no crack after puttying 

 

Storage

- Store in a dry place at room temperature of 20 with the lid completely closed.

- Products whose shelf life has expired shall be discarded chemically.

- Shelf life: 4 months in summer, 6 months in winter

 

Instructions for handling

- Dont eat or smoke in the workshop.

- Be careful not to let the product come in contact with skin- In case of contact with skin, wash thoroughly with neutral detergent.

- If you ingest the product, induce vomiting immediately and seek medical attention.

- Let the chief stationed permanently supervise and direct the work so that there are no safety accidents.

- Persons other than workers are not allowed to access the workshop.

- Stop the work in case of rain or when the temperature is below 5.

- In case of rain, if the product is exposed to rain, water flows into the lid even if the lid is closed, so store indoors or 

  cover with plastic bag when storing outdoors to prevent water from entering.   

- The construction site is marked with a safety sign, and access is prohibited during curing.

- Do not weld or use fire around the workshop.

- Cover the remaining product after use with a lid to prevent oxidation.

- Note that the pot life is short in summer and long in winter.