Industrial & Chemical Products Fine Chemicals
SC-513
[SC-513] Dry Injection Putty
-
Dry Injection Putty SC-513
Introduction
This product is putty for dry grout sealing. The formulation is soft like cream, so it has good workability, excellent adhesive property, and no burst in injection.
Intended Use
- Dry grout sealant
- Flattening of separated area of
aggregate
- Flattening of sunken area or embossed area of concrete
Features
- The product has no foreignness with
concrete thanks to low absorption rate and less shrinkage
- Outstanding adhesive property
- Excellent water resistance,
saltwater resistance, and chemical resistance
- After sealing, putty doesn’t run
down
- The formulation is of the cream type, so
the product shows good workability
Storage
- Store in a dry place at room temperature of 20℃ with the lid completely closed.
- Products whose shelf life has expired shall be discarded chemically.
- Shelf life: 4 months in summer, 6 months in winter
Instructions for handling
- Don’t eat or smoke in the workshop.
- Be careful not to let the product come in contact with skin- In case of contact with skin, wash thoroughly with neutral detergent.
- If you ingest the product, induce vomiting immediately and seek medical attention.
- Let the chief stationed permanently supervise and direct the work so that there are no safety accidents.
- Persons other than workers are not allowed to access the workshop.
- Stop the work in case of rain or when the temperature is below 5℃.
- In case of rain, if the product is exposed to rain, water flows into the lid even if the lid is closed, so store indoors or
cover with plastic bag when storing outdoors to prevent water from entering.
- The construction site is marked with a safety sign, and access is prohibited during curing.
- Do not weld or use fire around the workshop.
- Cover the remaining product after use with a lid to prevent oxidation.
- Note that the pot life is short in summer and long in winter.
Category | Main Item |
---|---|
|
|
CEO | Jiwon Kim |
---|---|
Foundation Year | 2011 |
Annual sales(per year) | Less than 1 million dollar |
Employees | Under 50 |
Homepage | http://www.silca.co.kr |
Address | (15101) 경기 시흥시 공단2대로140번길 13 (정왕동, 시화공단 2바 205) |
Company Introduction | 에폭시 제조업체로 품목별 다양한 제품을 생산하고 있습니다. 전지전자용 접착제, 주입제, 퍼티제 및 기능별 에폭시도료(내산, 구조물 보수보강용, 강재면 방청 등) 이 있으며 현장별로 특허를 보유한 자체생산력을 바탕으로 우수한 제품을 공급하고 있습니다. |