TITLE

Adhesives & SealantsSCANECO Steel Bar Anchor Bond

Industrial & Chemical Products Fine Chemicals

  • Model Name

    SC-511

  • Specification

  • Color

  • Introduction

    [SC-511] Steel Bar Anchor Bond

  • Certification
  • Price

    -

Steel Bar Anchor Bond  SC-511


Introduction

 This product is a product used for bonding various kinds of anchors with excellent adhesive property, 

showing no shrinkage in curing; hence the marked improvement of adhesion.



Intended Use

- New/Old concrete placing concrete in contact with hardened concrete anchor bonding

- Underwater concrete placing concrete in contact with hardened concrete anchor bonding

- Mechanical base anchor securing bonding

- Anchor bonding in installing trench grouting



Features

- Because the shrinkage and expansion are the same as those of concrete compared to other resins, there is no separation, so it has good weatherproof property

- Excellent water resistance, saltwater resistance, and chemical resistance

- There is no shrinkage, so there is no separation

- The product doesn’t corrode the iron 


 

Storage

- Store in a dry place at room temperature of 20 with the lid completely closed.

- Products whose shelf life has expired shall be discarded chemically.

- Shelf life: 4 months in summer, 6 months in winter


 

Instructions for handling

- Dont eat or smoke in the workshop.

- Be careful not to let the product come in contact with skin- In case of contact with skin, wash thoroughly with neutral detergent.

- If you ingest the product, induce vomiting immediately and seek medical attention.

- Let the chief stationed permanently supervise and direct the work so that there are no safety accidents.

- Persons other than workers are not allowed to access the workshop.

- Stop the work in case of rain or when the temperature is below 5.

- In case of rain, if the product is exposed to rain, water flows into the lid even if the lid is closed, so store indoors or 

  cover with plastic bag when storing outdoors to prevent water from entering.   

- The construction site is marked with a safety sign, and access is prohibited during curing.

- Do not weld or use fire around the workshop.

- Cover the remaining product after use with a lid to prevent oxidation.

- Note that the pot life is short in summer and long in winter.