Dry Primer  SC-602

Introduction

This product is an undercoat primer to prevent the paint from peeling off from the surface 

with excellent penetrability; thus strengthening the concrete surface and increasing the adhesive strength. 

Intended Use

- Undercoat primer for epoxy or polyurethane coating 

Features

- Because it is alkalescent, it neither neutralizes nor ages the concrete

- No foreignness with concrete thanks to low absorption rate and less shrinkage

- It strengthens the concrete surface, so it increases the life of coating

- Excellent penetrability

Storage

- Store in a dry place at room temperature of 20℃ with the lid completely closed.

- Products whose shelf life has expired shall be discarded chemically.

- Shelf life: 4 months in summer, 6 months in winter

Instructions for handling

- Don’t eat or smoke in the workshop.

- Be careful not to let the product come in contact with skin- In case of contact with skin, wash thoroughly with neutral detergent.

- If you ingest the product, induce vomiting immediately and seek medical attention.

- Let the chief stationed permanently supervise and direct the work so that there are no safety accidents.

- Persons other than workers are not allowed to access the workshop.

- Stop the work in case of rain or when the temperature is below 5℃.

- In case of rain, if the product is exposed to rain, water flows into the lid even if the lid is closed, so store indoors or 

  cover with plastic bag when storing outdoors to prevent water from entering.   

- The construction site is marked with a safety sign, and access is prohibited during curing.

- Do not weld or use fire around the workshop.

- Cover the remaining product after use with a lid to prevent oxidation.

- Note that the pot life is short in summer and long in winter.